What matters with burst pipe work
Fast isolation support
The first aim is to stop or reduce the water loss before damage spreads.
Repair or longer renewal
We judge if one split can be repaired or if a wider section should be changed.
Tested before we leave
Once repaired, the pipework is checked for pressure, flow and fresh leaks.
Stop the loss, then sort the damage
A burst pipe can dump a surprising amount of water into a house in very little time. We deal with split, cracked or failed pipework that needs prompt isolation before the damage spreads any further. The basic sequence is simple: stop the supply, assess the damaged section, remove compromised material, restore the connection and test the result. When you call S O plumbing, it helps if you have already turned off the stopcock or can tell us whether it is accessible. Opening a cold tap can also help relieve the system once the supply is off.
Repair what failed, not just the wet patch
The right fix depends on the condition of the pipe, how easy it is to reach, how much of it has failed and whether the nearby section looks sound or equally tired. In some cases a local repair is enough. In others, a longer section replacement gives a better outcome than patching one split and leaving weak pipework beside it. Work from S O plumbing is explained in plain terms, so you know why a short repair or a longer renewal has been suggested. Protect belongings where you can, and tell us if floors, cupboards or boxed areas affect access.
Frequently asked questions
What should I do if a pipe bursts?
Turn off the main stopcock if you can, open a cold tap to relieve the system and move belongings away from escaping water. Towels, buckets and a bit of speed help. When you call, tell us whether the supply is off and where the damaged pipe is located.
Is a patch always enough for a burst pipe?
No. A local repair can be suitable if the rest of the pipe is in good condition and the damage is limited. If nearby sections are worn, corroded or already showing weakness, replacing a longer run can be the sounder choice and reduce the chance of another failure beside it.
Can you replace a damaged pipe section?
Yes, where that is the better answer. After isolation and draining, we assess how much material needs to come out, what access is available and whether adjacent pipework should stay in place. We then restore the run and test it so you are not left wondering if the fix has held.